Geomembrane textured T2 (both sides)

Main \ Products \ Geomembrane textured T2 (both sides)

Physical and mechanical characteristics

Parameters Geomembrane PromGeoPlast HDPE textured on both sides, minimum requirements
Chemical resistance 0,5<pH<14
Elongation at break, % 350
Breaking strength, kN / m Thick. 1.0 mm 27
Thick. 1.5 mm 40
Thick. 2.0 mm 53
Thick. 2.5 mm 67
Thick. 3.0 mm 80
Elongation at elongation, not less (relative elongation), % 12
Tensile yield stress, kN / m Thick. 1.0 mm 15
Thick. 1.5 mm 22
Thick. 2.0 mm 29
Thick. 2.5 mm 37
Thick. 3.0 mm 44
Puncture strength, N Thick. 1.0 mm 320
Thick. 1.5 mm 480
Thick. 2.0 mm 640
Thick. 2.5 mm 800
Thick. 3.0 mm 960
Roughness height, mm 0,9
Oxidation stability, min 100
Flexibility in negative temperatures, degrees C -70
Water permeability, water absorption 0
Standard service life, years 50

By sending this message, you agree to Privacy Policy
Спасибо. Ваша заявка отправлена!
Ошибка! Повторите ввод данных